Students observe how a seed sprouts and investigate the conditions necessary for germination to occur. Grades 3-5

cotyledon: an embryonic leaf in seed-bearing plants, one or more of which are the first leaves to appear from a germinating seed

dormant: not active but able to become active

embryo: a human, animal, or plant in the early stages of development before it is born, hatched, sprouted, etc.

endosperm: tissue formed within a seed that contains energy (starch) and protein for the germinating seed

germinate: to begin to grow; sprout

seed coat: the protective outer covering of a seed

1. Organize the students into five groups. They will remain in these groups for the entire lesson. Give each group a set of Food Cards. Ask the students to identify each item on the cards. Explain that all of these items are food for humans and animals.
2. Tell the students that all of these foods come from plants that are grown on farms. Give each group a set of Plant Cards. Ask the groups to try to match the food pictures with the plants they come from. Review the correct matches.
3. Explain to the students that every plant begins as a seed. Give each group a set of Seed Cards. Ask the students to try to match the seed, plant, and food pictures together. Review the correct matches.
4. Tell the students they are going to learn more about these seeds and how they grow into plants.

Activity 1: Seed Properties

1. Provide each group with soybean, corn, oat, wheat, and alfalfa seeds and hand lenses.
2. Instruct the students to match the seeds with the Seed Cards. Review the correct matches.
3. Allow time for the students to observe the seeds with the hand lenses. Discuss their observations.
4. Pass out the Seed Properties Chart to each student. Explain to the students that a property describes how an object looks, feels, or acts. By describing the size, shape, color, texture, and mass of each seed, they will be describing the properties of the seeds.
5. Project the Physical Properties Anchor Chart on a large screen. Discuss the adjectives on the chart that could be used to describe the properties of the seeds. Have the students work together as a group to complete their Seed Properties Chart.
6. Discuss the properties of the seeds the students listed on their charts. Ask the students, "How are these seeds alike and different?"
7. Ask the students what they think the seeds look like inside. Project the Soybean and Corn Dissection Images onto a large screen. Point to the embryo inside each seed. Explain that inside every seed is an embryo, a baby plant. The embryo has the potential to grow into a new plant.
8. Point to the cotyledons inside the soybean seed and the endosperm inside the corn seed. Explain that seeds also contain food that the embryo uses for energy as it sprouts. Depending on the type of seed, the nutrients are absorbed or stored in either the cotyledon or endosperm of the seed.

Activity 2: Seed Germination

1. Have the students look at their group's matched Food, Plant, and Seed Cards. Ask the students to imagine that they are farmers that want to grow one of these crops. Ask, "How would you begin the growing process?" (plant the seeds)
2. Ask the students, "What do farmers need to to provide in order to help the seeds grow into the plants that provide humans and animals with food?" (water, air, and warmth; Once the germinating seed sprouts, the new plant will also need nutrients and light.)
3. Tell the students that they are going to provide their seeds with everything they need to germinate. Germinate is a scientific word for sprout. Explain that they will be germinating seeds in a very small farm—a farm in a glove.
4. Demonstrate the process of making a farm in a glove:
   1. Use a permanent marker to write the name of a different seed—soybean, corn, oats, wheat, and alfalfa—on each finger and thumb of the glove. Write your name in the center of the glove.
   2. Dip five cotton balls into the water. Squeeze any excess water out of the cotton balls so that they are saturated but not dripping. (Note: If you are sprouting large seeds like corn, squash, peas, or beans, use two moistened cotton balls).
   3. On each cotton ball, place one or two of the same variety of seeds until you have five cotton balls, each with a different type of seed on it.
   4. Place the "seeded" cotton balls into the correctly labeled fingers of the glove.
   5. Fold down the opening of the glove and secure it with tape.
5. Distribute the gloves, permanent markers, cotton balls, water bowls, seeds, and tape to each group. Assist students in creating their farm in a glove. 
6. Display the gloves by hanging them (fingers facing downward) on a classroom bulletin board. Because the cotton balls contain enough water to germinate the seeds, there is no need to water. Most seeds will sprout within a week. (Note: Some seeds, such as lettuce, cabbage, and peppers, can take up to two weeks to germinate.)
7. Have the students record daily observations of their germinating seeds. Instruct them to trace their hand on a page of their science journal for each day of observation. They can draw a picture of each seed or seedling on the appropriate finger of their tracing and note measurements and changes in the margins of the page. 
8. Some sprouts can be transplanted in 1-2 weeks. Cut the bottom off each finger of the glove and remove the cotton balls with the sprouts. The entire cotton ball should be transplanted along with the seedling into the soil.

Activity 3: Changing Variables

1. Ask the students what a seed needs in order to germinate. (water, air, and warmth)
2. Ask the students what they think might happen if one of these needs were missing. Do they think the seeds would germinate? Explain to the class that they are going to investigate what happens when you try to germinate a seed without either water, air, or warmth being present.
3. Assign each group one of the five seeds to test—soybeans, corn, oats, wheat, or alfalfa.
4. Demonstrate how to set up the investigation:
   1. Use a permanent marker to write the type of seed the group was assigned in the center of the glove.
   2. The thumb of the glove will hold the control seed. This seed will receive water, air, and warmth. Write "control" on the thumb.
   3. Write one of the following on each of the next three fingers—no water, no air, no warmth.
   4. Groups will design an investigation of their choice for the last finger. Groups may choose to investigate whether or not the seed will germinate in the dark or when using a liquid other than water. Instruct the groups to label the last finger with the changed variable of their choosing.
   5. Dip three of the cotton balls into water. Squeeze any excess water out of the cotton balls so that they are saturated but not dripping. Add the seeds onto each cotton ball and place two of the "seeded" cotton balls into the "Control" thumb and the finger labeled "no warmth."
   6. Wrap the third "seeded" cotton ball in plastic wrap and place it into the finger labeled "no air." Remove as much air as possible from the finger and tightly wrap a rubber band just above the cotton ball.
   7. Place the finger labeled "no warmth" into the bowl of ice or remove the finger, secure the open end with tape, and place in the refrigerator.
   8. Place a dry cotton ball and seeds into the finger labeled "no water." 
   9. Prepare the last finger according to the changed variable choice.
   10. Fold down the opening of the glove and secure it with tape.
5. Provide each group with a glove, permanent marker, five cotton balls, a water bowl, ten of the assigned seeds, a rubber band, and a bowl of ice or ice-cold water. Assist students in creating their farm in a glove.
6. Have the students record daily observations of their germinating seeds like they did in Activity 2.
7. After observing the seeds for two weeks, have each group share their observations and conclusions with the class.

 

After conducting these activities, review and summarize the following key concepts:

• Most plants begin their life as a seed.
• Seeds have seed coats, an embryo, and a food source in the form of either an endosperm or cotyledons.
• In order to germinate, a seed needs moisture, air, and warmth.

1. https://extension.psu.edu/seed-and-seedling-biology
2. https://www.nationalgeographic.com/science/article/120221-oldest-seeds-regenerated-plants-science
3. https://extension.uga.edu/publications/detail.html?number=B737

• A Seed in Need: A First Look at the Plant Cycle
• A Seed is Sleepy
• AgBadging Field Guide
• Buried Seeds, Buried Treasure
• Every Little Seed
• Farming in a Glove
• Farming in a Glove (Corn Seeds)
• Growing Microgreens
• How to Use a Ragdoll Test to Estimate Field Germination
• Living Necklace Kits
• My School Yard Garden
• Oh Say Can You Seed?
• Sadie's Seed Adventures: Learning About Seeds
• Seed, Soil, Sun: Earth's Recipe for Food
• Sprouting Success
• The Curious Garden